Float Level Transmitter

Float Level Transmitter

JMI are Leading manufacturer of Float Level Transmitter. This are ideal for continuous Level  monitoring in water, diesel, chemical  and oils for accurate level measurement. The Output is not affected by Liquid type, temperature, pressure and other physical parameters. The Transmitter is factory calibrated and is ready to use.

Construction:

Float Level Transmitter consists of non-magnetic sealed stem containing series of reed switches and resistor, Float carrying magnet, mounting adaptor (or Flange) and end closure containing electronics.

Application:

Consider our Float Level Transmitters for all your continuous Liquid Level Monitoring needs like water, Diesel, , Lube Oils, Fuels, Chemicals, & Petrochemicals Liquids.

Here are few areas where transmitters can be used

  • Utilities
  • Beverages Industry
  • Medical
  • Pharmaceuticals
  • Food Processing
  • Breweries, Etc

Technical Data

Overall Length300 mm to 5000mm
Measuring Error±0.25 % or Span
Output Temperature Co-efficient±0.007% / oC
Resolution5mm / 10mm
Ambient Temperature-40oC to 60oC
Liquid Temp. Range-40oC to 120oC
Liquid Min. Density0.8 gm/cc
Max. Pressure10 kg/cm2
Protection categoryWeather proof Ip66 to IS : 2147 (or)
Flame Proof
Gr. IIA & IIB to IS : 2148
TerminalsMax. 1.5mm2 Flexible
Cable EntryPG11 for weather Proof ¾” Et for Flame proof (Glands not supplied)
Output2 wire, 4-20 mA
3 wire, 0-10 V DC
RS 485
Process ConnectionThreaded
Flanged
Tri clamp
Others
Excitation Voltage10-30 V DC
Loop ResistanceMax. 1200 Ohms
Related products
Theme BCF By aThemeArt - Proudly powered by WordPress .
BACK TO TOP